This a Blade 400 3D Edit of the Original Blade 400 3D But this is for G5.  This is more in like a real Blade 400, It has the correct specs as a Real Blade 400, and it also has the new radio setup that you can find on Horizon Hobby's site.  Also, just as a side note this has 1 upgrade on it that I had to do to get the tail to work right, It has a Spektrum DSP75 Digital servo on the tail.  With at least a digital servo and the G110 in "DS Mode" the tail will work much better on your Blade 400.

In order to use this Blade 400 you must first download this. Then you can use my edit.

*Note: after you download this rename the .zip to .rfx, Happy Flying.

*Note: You need to have the Blade 400 3D or Blade 400 3D v2 to use this edit.  The Blade 400 can be downloaded here. The Blade 400 3D v2 can be downloaded here.

*Note: After you download this file you need to Re-Start RealFlight in-order for it to work properly

This is an edit of the Blade 400 3D, This is for G5.  It Still has the stock motor, but now it has some Upgrades like, CY Radix 325's Main Rotor Blades, An Align RCE-BL35X ESC , The Hitec HS-5065MG's on the Cyclic, and a Hitec HSG-5083MG on the tail.  It also now has a Futaba GY-401 Gyro, an Align High Power 20C 3S LiPo, and it has a Stiffer head to make it fly like it has a Simulated Aluminum Head.  This also has a modified radio setup based off of the new Horizon Hobby setup.  It also has all of the correct weights and Specs now.

*Note: after you download this rename the .zip to .rfx, Happy Flying.

*Note: You need to have the Blade 400 3D or Blade 400 3D v2 to use this edit.  The Blade 400 can be downloaded here. The Blade 400 3D v2 can be downloaded here.

*Note: After you download this file you need to Re-Start RealFlight in-order for it to work properly

Ever get Tired of trying to fly and have people shooting at your heli because all it is is a heli?  Well, I have the fix for that.  The flybarless Combat version of the Dominion 3D 90 offers the maximum in 3D potential,  And has a nice little armament to get people away from you, Caring Three .50 Cal machine guns and, Dual rocket launchers Its sure to get people off of you so that you can 3D again.  Powered by an O.S. Engines .90 HZ-PS 3D with the PD-08 pump, this Dominion 3D 90 is the right choice for practicing intense unlimited 3D aerobatics, And all of your Combat needs.  Removing the flybar allows for a more efficient head due to reduced mass, leading to faster cyclic response, and with the Simulated "Mikado V-Bar" system it's awesome for hard 3D flight. 

This Heli is Locked into Idle Up 2, and the Guns fire by pushing the 3 Position Switch away from you.  The rockets fire by pulling the 3 Position switch towards you, and Safety is center.

This Dominion is for G5.

*Note: after you download this rename the .zip to .rfx, Happy Flying.

*Note: After you download this file you need to Re-Start RealFlight in-order for it to work properly.

*Disclaimer: The "Mikado V-Bar" used in this heli, is not based on the real one. I have never used one but this is how I think it might fly.

The flybarless version of the Dominion 3D 90 offers the maximum in 3D potential.  Powered by an O.S. Engines .90 HZ-PS 3D with the PD-08 pump, this Dominion 3D 90  is the right choice for practicing intense unlimited 3D aerobatics.  Removing the flybar allows for a more efficient head due to reduced mass, leading to faster cyclic response, and with the Simulated "Mikado V-Bar" system it's awesome for hard 3D flight. 

This Dominion is for G5.

*Note: after you download this rename the .zip to .rfx, Happy Flying.

*Note: After you download this file you need to Re-Start RealFlight in-order for it to work properly.

*Disclaimer: The "Mikado V-Bar" used in this heli, is not based on the real one. I have never used one but this is how I think it might fly.

--Original Description--

Weighing in at under one ounce, the nimble Blade® mSR RTF takes ultra micro helicopter performance to the next level. It comes from the factory completely assembled and flight tested with everything you need to get flying. At the heart of the Blade mSR’s design is a Bell-Hiller rotor head that provides the kind of speed and agility you would expect of a single-rotor heli but maintains a measure of positive stability similar to a coaxial heli. This blend of agility and stability makes it the ideal “next step” for someone moving up from a coaxial heli, such as the Blade CX3 or Blade mCX.

For single-rotor ultra micro heli excitement you can fly almost anywhere, the Blade mSR simply can’t be beat.

--Aircraft Description--

This is a E-Flite Blade mSR originally modeled by "oneeyejack" for RealFlight G5. The Physics edit was done by "Dr.Moo!" along with the Cameras. Visit http://drmoo.jimdo.com/ for more edits by "Dr.Moo!"

-- Controls--

Channel 1 Aileron
Channel 2 Elevator
Channel 3 Throttle
Channel 4 Rudder
Channel 5 Dual Rates
Channel 6 -- N/A --
Channel 7 -- N/A --
Channel 8 -- N/A --

--Cameras--

F1 Fixed View.
F2 Nose Camera.
F3 Chase View.
F4 On-board "Boom" View.
F5 On-board "Cockpit" View.
F6 On-board "Forward Facing" View.
F7 On-board "Gear" View.
F8 On-board "Rear Facing" View.
F9 On-board "Skid" View.
F10 On-board "Swash" View.

*Note: You need to have the Blade mSR to use this edit.  The Blade mSR can be downloaded here.

*Note: after you download this rename the .zip to .rfx, Happy Flying.

*Note: If you get an error saying "Unable to find <<insert battery, motor, blades here>> Restart RealFlight and it will have all the correct items. Also, this edit is fudged a little since the Flybar on the mSR over compensates for the little heli, So I used AFS Gyros and Expo to get the same effect.